Caution
2
Never use the door in a place which is subject to dampness, vibration or corrosive gas,
as this may result in accidents such as fire, electric shocks or loose components.
To prevent finger traps allow a space of >25mm between the fully opened door edge
and upright column.
Never
disconnect the
power when the door is in operation,
this may
cause injury
to
pedestrians.
Apply visual aids to door leaves, otherwise this may cause injury to pedestrians that
may of
lost sight of the door leaf
(s)
.
Never install an electric device with a capacity of >DC24V 300mA to the controller,
otherwise it will result in the controller being overloaded.
Other precautions
To prevent failure do not install
a door leaf that exceeds the specified weight.
Battery Installation
- Ensure batteries are fully charged before instllation.
- The service life of
the
batteries
is between
3-5 years at an ambient temperature of 0℃-40 ℃.
Excessive temperature variations will reduce the battery performance.
- If after
installation and
charging
,
the battery
produces a fault
,
check
the
battery
s
helf life
If the shelf life has expired, replace it immediately.
- It is recconmended to perform a battery inspection every 6 month intervals.
To prevent malfunction the equpment should be installed in an environment with ambient
temperature not exceeding 0℃-40℃
Always use the manufacturers brand of electonic lock to ensure correct operation