What to do if the Elma Industrial Equipment filter capacity display requests a filter change after installing a new filter cartridge?
If the filter capacity display requests a filter change even after a new filter cartridge has been installed, it may be due to the IN and OUT connections. Check these connections and fix them if necessary.
What to do if there is a water leak at the connections of Elma Industrial Equipment?
If you notice a water leak at the connections, consider the following possibilities: * The connection may not be screwed up to the limit stopper - check the connection. * The seal may not be positioned correctly - check that the seal is correctly positioned. * The connection may be defective - replace the connection.
General| Model | ST |
|---|---|
| Application | Industrial cleaning |
| Dimensions (W x D x H) | Varies by model |
| Weight | Varies by model |
| Material | Stainless steel |
| Series | Elmasonic xtra ST |
| Tank Capacity | Varies by model |
| Heating Power | Varies by model |
| Ultrasonic Power | Varies by model |
| Timer | Yes |
| Power Supply | Varies by model |
Guides on how to effectively use and interpret the operating manual.
Essential safety instructions for operating the ultrasonic cleaning unit correctly and safely.
Explains the process of ultrasonic cleaning and energy conversion.
Outlines the sequential steps for performing an ultrasonic cleaning cycle.
Highlights the main attributes and capabilities of the Elmasonic xtra ST unit.
Details CE conformity and RFI statement for regulatory compliance.
Lists standard included items and available optional accessories for the unit.
Presents initial mechanical and electrical data for 300-800H models.
Continues technical data for 300-800H models, including heating and acoustics.
Presents initial mechanical and electrical data for 1400-2500H models.
Continues technical data for 1400-2500H models, including heating and acoustics.
Explains the function of each identified feature on the unit's front and side view.
Describes the parts and design of the ultrasonic cleaning tank.
Illustrates the correct placement of the cleaning basket for various operations.
Explains the purpose and operation of each control on the unit's front panel.
Instructions for safely unpacking the unit and preparing the operating environment.
Details the correct method for connecting the unit to the electrical mains supply.
Step-by-step guide on how to fill the unit with cleaning liquid, including safety notes.
Instructions for setting and achieving the desired cleaning liquid temperature.
Explains the process of removing dissolved air from the cleaning liquid for better efficiency.
Describes how to select the appropriate ultrasonic frequency for different cleaning tasks.
Details the benefits and activation of the pulse mode for intensified cleaning.
Explains the dynamic mode for optimized power distribution and improved cleaning efficiency.
How to start an ultrasonic cleaning cycle immediately with manual time setting.
Operation sequence for automatic start-up based on reaching the set temperature.
Using manufacturer-set parameters for common cleaning tasks.
Guidelines for correctly placing items in the tank and safety precautions.
Instructions for rinsing, drying, and draining the unit after cleaning.
Critical safety warnings and limitations when using solvent-based cleaning agents.
Guidelines on safe use of aqueous cleaners, avoiding corrosive substances.
Lists Elma's recommended cleaning concentrates for dental applications.
Lists Elma's recommended cleaning concentrates for medical applications.
Lists Elma's recommended cleaning concentrates for optical items.
Lists Elma's recommended cleaning concentrates for laboratory use.
Lists Elma's recommended cleaning concentrates for jewellery cleaning.
Lists Elma's recommended cleaning concentrates for watch components.
Lists Elma's recommended cleaning concentrates for industrial and workshop applications.
Procedures for regular cleaning and upkeep of the ultrasonic unit.
Advice and recommendations to prolong the operational lifespan of the cleaner.
Guidelines for handling unit repairs and returning for service.
Lists common error messages and their corresponding remedies for troubleshooting.
Step-by-step instructions for replacing the unit's electronic control module.
Information on responsible disposal and recycling of the unit.
Provides contact information for technical support and general inquiries.
To Next Page
