ROTOR 8M.07
Universal rotor for 4 anodized aluminum adapters (flat bottom), also
suitable for platelet-rich plasma (PRP) preparation.
Maximal volume of applied test tubes: 50 ml.
Maximal size of applied test-tubes (D x L): 30 x 130 mm.
Top speed: 4500 rpm.
Total test tube imbalance limit: 5 g
Autoclave sterilization at a temperature up to 121 °С (20
minutes) is allowed.
ROTOR 8M.08
Universal rotor for 6 anodized aluminum adapters (flat bottom), also
suitable for platelet-rich plasma (PRP) preparation.
Maximal volume of applied test tubes: 50 ml.
Maximal size of applied test-tubes (D x L): 30 x 120 mm.
Top speed: 4500 rpm.
Total test tube imbalance limit: 5 g.
Autoclave sterilization at a temperature up to 121 °С (20
minutes) is allowed.
ROTOR 8M.09
Universal rotor for 2 anodized aluminum adapters
(cone bottom) and 4 stainless steel adapters.
Maximal size of applied test-tubes (D x L):
30 x 130 mm - 2 pcs.
17.5 x 120 mm - 4 pcs.
It is possible to order inserts in 50 ml adapters (diameter 18 and 22
mm) for the test tubes (DxL) 17.5 x 115 mm/20 x 115 mm.
Top speed: 4500 rpm.
Total test tube imbalance limit: 3g.
Autoclave sterilization at a temperature up to 121 °С (20
minutes) is allowed.
ROTOR 8M.10
Universal rotor for 2 anodized aluminum adapters (flat bottom)
and 4 stainless steel adapters, also suitable for platelet-rich
plasma (PRP) preparation.
Maximal size of applied test-tubes (D x L):
37 x 125 mm - 2 pcs.
17.5 x 120 mm - 4 pcs.
Top speed: 4500 rpm.
Total test tube imbalance limit: 3 g.
Autoclave sterilization at a temperature up to 121 °С (20
minutes) is allowed.
ROTOR 8М.18
Universal rotor for 2 anodized aluminum (cone bottom) and 2
stainless steel adapters.
Maximal size of applied test-tubes (DxL):
30 x 130 mm – 2 pcs.
17,5 x 131 mm – 2 pcs.
Top speed: 4500 rpm.
Total test tube imbalance limit: 3 g.
Autoclave sterilization at a temperature up to 121 °С (20
minutes) is allowed.
To Next Page
Loading...
