Elmi CM-7S Plus - 1 Introduction; 1.1 Technical Specifications; 1.2 Package Contents

1 Introduction
CM series centrifuge CM-8S is easy to use and reliable in operation. We ask you to carefully read the
user manual and follow the instructions for proper operation and maintenance. This will ensure long and
flawless exploitation of the device.
Centrifuge CM-8S is applied to separate solutions into fractions. The device is used in medicine, analytical
chemistry, microbiology, virology, clinical biochemistry, etc.
1.1 Technical specifications
Rotor rotation speed, RPM
from 100 to 4500
Relative centrifugal force, RCF (G)
from 1 to 3735
Accuracy of rotation speed maintenance, %
±2
Timer range
1 min. - 12 h
Rotor speed step (RPM)
1
Centrifugal force step, RCF (G)
1
Timer step
1 second
Number of centrifuge brake levels
10
Noise level (1 m distance, dBA)
no more than 55
Electromagnetic compatibility
according to EN 61326-1: 2013
Ambient conditions:
Ambient temperature, ºС
from +10 to +40
Relative humidity, %
80
Do not use in humid premises (above 80% humidity)
Use up to a height of 2000 m above sea level
Total test tube imbalance limit, g
Refer to pages 16, 17
Mains voltage, V
110-240 V
Mains frequency, Hz
50-60 Hz
Overvoltage category
II
Power, W
320
Size of the device (length x width x height), mm
431x410x247
Approximate weight, kg (without rotor and cord)
14.7
Safety area
300 mm
Max. permitted density of material to be centrifuged
1.2 g/ml
Pollution degree
2
Number of programs, created by user
10
1.2 Content of package
Name
pcs
Centrifuge
1
Power cord
1
Rotor
1
Rotor key / emergency lid opening key
1
Rotor nut and spacer
1
User manual
1
Packaging
1