Elmo ST-1200 - 1. HEAT PROOF GLASS (Fig. 5)

B. PROJECTION LAMP & LENS
1. HEAT PROOF GLASS (Fig. 5)
Fig. 5
DISASSEMBLY
1. Push lamp cover stopper (Fig.5-1) and take off Lamp cover.
2. Straighten out the latches (Fig.5-2,x4) of Heat proof glass holder and
take out LC heat proof glass and Heat proof glass presser.
ASSEMBLY
1. As to the assembling, follow the reverse way of the above steps.
2. When replace LC heat proof glass, of which divided crack should not be
captured by the latches of Heat proof glass holder.
-5-