To Next PageTo Next PageWhy is my Elmo TT-12 remote control not working?
If the remote control for your Elmo Document Camera isn't working, the batteries may be low. Try replacing them with new ones. Also, ensure you are using the remote control that was supplied with the unit.
What to do if my Elmo TT-12 shows no image?
If your Elmo Document Camera displays no image, several issues could be the cause. Ensure the AC adapter is correctly connected to the wall outlet and the document camera's power supply socket. Also, verify that the power is turned on (indicated by a blue light). Check the RGB/HDMI/VIDEO switch setting. If the unit doesn't start after being recently turned off, wait a few seconds before turning it back on. Finally, adjust the zoom setting if it's set to the TELE side.
How to display image from USB on Elmo TT-12?
To display an image from the USB on your Elmo Document Camera, switch the USB mode from Mass Storage to Application by referring to the 'Function Setting Menu'. When using Play mode, change the output image to Camera image.
How to fix out of focus image on Elmo TT-12 Document Camera?
If the image from your Elmo Document Camera is out of focus, the object may be too close to the lens. Try moving the object slightly away from the lens. If that doesn't work, manually focus the image.
What to do if Elmo Document Camera does not display images from SD card/USB flash drive?
If images on the SD card or USB flash drive are not displayed on your Elmo Document Camera, remove the SD card or USB flash drive, wait a few seconds, and then reinsert it.
How to brighten the image on Elmo Document Camera?
If the image from your Elmo Document Camera is too dark, press the [] button on the operating panel or the [] button on the remote control to adjust the brightness.
Why is the video output image scrambled on my Elmo Document Camera?
If the video output image from your Elmo Document Camera is scrambled or unclear, the video output may be set to [NTSC]. Set the video output system to PAL.
What to do if Elmo Document Camera doesn't perform operations after inserting SD card/USB flash drive?
If, after inserting the SD card or USB flash drive into your Elmo Document Camera, operations cannot be performed, the SD card or USB flash drive may not be reading correctly. Format the SD card or USB flash drive twice and then try again.
Why does Elmo Document Camera output image resolution change automatically?
If the output image (resolution) of your Elmo Document Camera changes automatically, it is because when an HDMI monitor is connected, the output image (resolution) is automatically changed based on information from the connected monitor.
How to fix striped image on Elmo Document Camera?
If the image from your Elmo Document Camera is striped, changing the shooting range may help. If vertical stripes appear on an LCD projector image, manually adjusting the dot clock at the projector side may help.
General| Optical Zoom | 12x |
|---|---|
| Digital Zoom | 8x |
| Frame Rate | 30 fps |
| Focus | Auto/Manual |
| Aperture | F3.2 |
| Interface | USB 2.0 |
| Compatibility | Windows, macOS |
| Output | HDMI, USB |
| Lighting | LED |
| Resolution | 1920 x 1080 (Full HD) |
