Elmo TT-12i - User Manual

Figure 1
Figure 2
Figure 3
Technical Bulletin
Subject: Changing USB Mode Setting to “UVC”
Model: TT-12i & TT-12iD
The TT-12i and TT-12iD must have the USB Mode Setting set to “UVC” to
be recognized natively by a computer Operating System. During this
process ensure the USB cable is NOT connected to the camera as it may
cause the setting change to fail.
1. Connect the document camera to a display (e.g. monitor, TV,
projector, etc.) using the HDMI or RGB output. The on screen menu
is not available when using the USB or composite video connections.
2. Press the Menu button the camera base to activate the on screen
menu.
3. Using the button on the base (Figure 1) navigate to the Preferences
Icon (Figure 2)
4. Navigate to the USB Mode sub-menu (Figure 3) and press select to
enter the menu.

Summary

Changing USB Mode to UVC

Initial Setup and Menu Navigation

Connect camera to display via HDMI/RGB, activate on-screen menu, and navigate to Preferences and USB Mode sub-menus.

Select UVC Mode

Select the "UVC" option from the USB Mode menu.

Finalize Connection

Exit menu, power down camera, connect USB cable, and power on.

Elmo TT-12i Specifications

General

Sensor type	CMOS
Image freeze	-
Maximum frame rate	30 fps
Optical sensor size	1/2.8 \
Supported graphics resolutions	1280 x 720 (HD 720), 1920 x 1080 (HD 1080)
Optical zoom	12 x
Maximum focal length (f)	48 mm
Interface	USB 2.0
USB 2.0 ports quantity	1
Product color	Grey, White
AC input voltage	100-240 V
Power supply type	AC
Power consumption (typical)	16.2 W
Cables included	USB

Weight and Dimensions

Depth	373.5 mm
Width	355 mm
Height	426.5 mm
Weight	3200 g
Dimensions folded (WxDxH)	195 x 294 x 469 mm