Elmo MX-P - User Manual

Other manuals for Elmo MX-P

Quick Start Guide68 pages

Questions and Answers

R
Robert RiveraAug 20, 2025
What to do if the image of my Elmo Document Camera does not move?
- B
  Brian BrooksAug 20, 2025
  If the image on your Elmo Document Camera isn't moving, it might be due to the following reasons: * The Freeze function may be activated by pressing the button on the Operating panel. If so, cancel the freeze status by pressing the button again. * The Freeze function may be selected by Image Mate 4. In this case, cancel the freeze status to resume the live image feed. * Try reconnecting all the cables.
Z
zgreenAug 22, 2025
How to fix a dark image on my Elmo Document Camera?
- D
  Debra WrightAug 22, 2025
  If the image from your Elmo Document Camera appears too dark: * The intensity of the lighting may be insufficient. Press the button on the operating panel to adjust the brightness. * Press the button to turn on the LED lighting.
J
Jeffrey MeyersAug 26, 2025
Why is my Elmo MX-P Document Camera image out of focus?
- J
  Jillian RamirezAug 26, 2025
  If the image from your Elmo Document Camera is out of focus, it could be because the document or object is too close to the lens. Try moving the document slightly away from the lens.
S
smithnicoleAug 28, 2025
What causes the Elmo MX-P Document Camera UVC video stream to freeze?
- T
  Timothy SchaeferAug 28, 2025
  The displayed image may pause briefly when the object moves quickly. Adjusting the brightness manually might improve this issue.
D
Dylan CrossAug 30, 2025
How to resolve a striped image on my Elmo Document Camera?
- M
  Morgan GoldenAug 31, 2025
  Striped images on your Elmo Document Camera can occur due to several reasons: * It may be interference fringes between dots of printed matter and TV scanning lines or CMOS pixels. Changing the shooting range may improve the problem. * The image may be distorted when shooting a monitor screen while the live image feed is displayed. * Vertical stripes may appear on an LCD projector image. Manually adjusting the dot clock at the projector side may help the problem. * Vertical stripes may appear when shooting in dark conditions. Making the shooting environment brighter may reduce the vertical stripes.
S
Stephanie AllenSep 2, 2025
What to do if my Elmo Document Camera fails to output the UVC video stream?
- C
  coxrachelSep 2, 2025
  Disconnect the USB cable and restart the software.
M
morenokennethSep 5, 2025
What causes other images to overlap on the UVC video stream of my Elmo Document Camera?
- A
  Alexis DanielsSep 5, 2025
  Depending on your software, OS or the connection status, other images than the camera image may be overlapped on the camera image. Reconnect the MX-P or restart the software.
J
Jacqueline PittsSep 7, 2025
How to fix distortion of the image on my Elmo Document Camera?
- B
  Brenda MoonSep 7, 2025
  To fix the distortion of the image on your Elmo Document Camera: * Use a high-spec computer. * Reducing the resolution or frame rate may improve the distortion of the image.
S
susan85Sep 12, 2025
Why does the Elmo MX-P Document Camera UVC video stream display upside down?
- W
  William BatesSep 12, 2025
  Verify that the graphic driver and other device drivers of your computer are the latest version.
C
Christopher WilliamsSep 13, 2025
What to do if my Elmo MX-P Document Camera displays no UVC video stream and shows an error message?
- S
  Shane WilsonSep 13, 2025
  If your Elmo Document Camera displays no UVC video stream and shows an error message, it may be because the software recognizes it as an error when it takes time to prepare the image output. Try restarting the MX-P and reconnecting it to the computer.

Summary

Important Safeguards

Before You Use and Handling Precautions

Handling and Setup Precautions

Precautions for preventing drops, proper carrying, and initial setup.

Basic Operations and Controls

Operating Panel Functions

Detailed functions of each button on the operating panel.

Cable Connection Guide

Guide to connecting power and output cables.

Resolution, Settings, and Connectivity

USB Resolution and Frame Rate

Setting Up the MX-P

Connecting to External Devices

Instructions for connecting the MX-P to external display devices and computers.

Using the Product Features

Image Adjustment (Size, Brightness, Focus)

Image Control (Pause, Rotate) and LED Lighting

Image Mate 4 Software

Software Features and System Requirements

Software Installation and Usage Cautions

Guide to installing Image Mate 4 and important usage cautions.

Troubleshooting and Specifications

Common Symptoms and Solutions

Common symptoms like no image, focus, or brightness issues and their solutions.

Advanced Image and Video Issues

Troubleshooting for moving, striped, distorted, or UVC stream problems.

Product Specifications Overview

Technical specifications for the main camera, functions, and illumination device.

Elmo MX-P Specifications

General

Auto focus	Yes
Digital zoom	16 x
Shooting area (WxD)	373.3 x 281.9 mm
Lamp type	LED
Product color	White
Sensor type	-
Maximum frame rate	60 fps
Optical sensor size	- \
Supported graphics resolutions	1920 x 1080 (HD 1080), 3840 x 2160
Interface	USB 3.2 Gen 1 (3.1 Gen 1)
USB connector type	Micro-USB B
VGA (D-Sub) output ports	1
Operating voltage	5 V
Power supply type	DC
Power consumption (typical)	4.6 W