What to do if no image is displayed from the USB on Elmo Document Camera?
If no image is output from the USB on your Elmo Document Camera, it could be because the USB mode is set to Mass Storage, Play mode, Recording mode, or when using the Compare Picture Function or the PIP Function. Switch the USB mode from Mass Storage to Application by referring to the “Function Setting Menu”. When using Play mode, change the output image to Camera image.
How to fix Elmo Document Camera when no image is displayed?
If your Elmo Document Camera isn't displaying an image, there are several potential causes: * The cable might not be correctly connected. Reconnect the AC adapter. * The AC adapter might be disconnected from the wall outlet. Reconnect it. * The AC adapter might be disconnected from the power supply socket of the unit. Reconnect it. * The power might not be on (indicated by a blue light). Reconnect the AC adapter. * The zoom might be set to the TELE side, displaying only white/black. Reconnect the AC adapter. * If you've just turned the power off and on, the unit may not start. Wait several seconds before turning it back on. * The resolution might not be set correctly for the image output (RGB/HDMI). Set the resolution correctly from the menu.
What to do if the Elmo P10HD Document Camera image is out of focus?
If the image from your Elmo Document Camera is out of focus: * The document (object) might be too close to the lens. Move it slightly away. * The auto focus might be having difficulty adjusting. Focus on an image manually.
Why is the image too dark on my Elmo P10HD?
If the image on your Elmo Document Camera is too dark, it may be due to insufficient lighting. Press the [ ] button on the remote control to adjust the brightness.
General| Frame Rate | 30 fps |
|---|---|
| Output Resolution | 1920 x 1080 |
| Light Source | LED |
| Compatibility | Windows, Mac |
| Weight | 1.2 kg |
| Resolution | 1920 x 1080 |
| Focus | Auto/Manual |
| Connectivity | USB |
To Next Page
