Elmo L-12 - User Manual

Questions and Answers

G
gonzalezdavidAug 18, 2025
Why is my Elmo L-12 Document Camera remote control not working?
- P
  Pamela BellAug 18, 2025
  If the remote control for your Elmo Document Camera isn't working, the batteries may be low. Try replacing them with new ones. Also, ensure you are using the remote control that was supplied with the unit.
B
Brianna MillerAug 20, 2025
What to do if my Elmo L-12 shows no image?
- A
  Alyssa PatelAug 20, 2025
  If your Elmo Document Camera displays no image, several issues could be the cause. Ensure the AC adapter is correctly connected to the wall outlet and the document camera's power supply socket. Also, verify that the power is turned on (indicated by a blue light). Check the RGB/HDMI/VIDEO switch setting. If the unit doesn't start after being recently turned off, wait a few seconds before turning it back on. Finally, adjust the zoom setting if it's set to the TELE side.
T
Teresa ObrienAug 22, 2025
How to display image from USB on Elmo Document Camera?
- H
  Heather RogersAug 22, 2025
  To display an image from the USB on your Elmo Document Camera, switch the USB mode from Mass Storage to Application by referring to the 'Function Setting Menu'. When using Play mode, change the output image to Camera image.
C
Charles EllisonAug 25, 2025
How to fix out of focus image on Elmo L-12?
- A
  anthony29Aug 26, 2025
  If the image from your Elmo Document Camera is out of focus, the object may be too close to the lens. Try moving the object slightly away from the lens. If that doesn't work, manually focus the image.
S
Shannon SimmonsAug 27, 2025
What to do if Elmo Document Camera does not display images from SD card/USB flash drive?
- J
  jamie86Aug 27, 2025
  If images on the SD card or USB flash drive are not displayed on your Elmo Document Camera, remove the SD card or USB flash drive, wait a few seconds, and then reinsert it.
J
Jesus ThomasAug 30, 2025
How to brighten the image on Elmo L-12?
- D
  Dennis WilsonAug 30, 2025
  If the image from your Elmo Document Camera is too dark, press the [] button on the operating panel or the [] button on the remote control to adjust the brightness.
L
Lynn HallSep 1, 2025
Why is the video output image scrambled on my Elmo L-12 Document Camera?
- I
  icisnerosSep 1, 2025
  If the video output image from your Elmo Document Camera is scrambled or unclear, the video output may be set to [NTSC]. Set the video output system to PAL.
M
Matthew AyalaSep 4, 2025
What to do if Elmo L-12 Document Camera doesn't perform operations after inserting SD card/USB flash drive?
- O
  oconnorraymondSep 4, 2025
  If, after inserting the SD card or USB flash drive into your Elmo Document Camera, operations cannot be performed, the SD card or USB flash drive may not be reading correctly. Format the SD card or USB flash drive twice and then try again.
D
derek65Sep 6, 2025
Why does Elmo Document Camera output image resolution change automatically?
- V
  vhenrySep 6, 2025
  If the output image (resolution) of your Elmo Document Camera changes automatically, it is because when an HDMI monitor is connected, the output image (resolution) is automatically changed based on information from the connected monitor.
C
Charles MclaughlinSep 9, 2025
How to fix striped image on Elmo Document Camera?
- K
  Kevin RodgersSep 9, 2025
  If the image from your Elmo Document Camera is striped, changing the shooting range may help. If vertical stripes appear on an LCD projector image, manually adjusting the dot clock at the projector side may help.

Summary

Important Safeguards

Before You Use

Basic Operations

Operating Panel Controls

Details and functions of the buttons on the main unit's operating panel.

Rear Panel and Cable Connections

Description of the rear panel ports and how to connect cables.

Supplied Accessories

Shooting Images Setup

Instructions for setting up the main unit and connecting cables for image capture.

Changing Unit Settings

Advanced Operations

Using SD Card and USB Flash Drive

Save SD Card Data to PC via USB

PC Presentation with Supplied Software

Using ELMO Wireless Slate;Tablet (CRA-1)

Connecting and using the wireless pen tablet for annotation and control.

Trouble Shooting

Symptoms and Confirmation Guide

Lists common symptoms and their possible causes and remedies for troubleshooting.

Elmo L-12 Specifications

General

Sensor type	CMOS
Image freeze	-
White balance	Auto, Manual
Maximum frame rate	30 fps
Optical sensor size	1/2.8 \
Effective sensor resolution	3.4 MP
Supported graphics resolutions	1024 x 768 (XGA), 1280 x 1024 (SXGA), 1280 x 720 (HD 720), 1280 x 800 (WXGA), 1920 x 1080 (HD 1080)
Auto focus	Yes
Digital zoom	8 x
Optical zoom	12 x
Shooting area (WxD)	420 x 313 mm
Maximum focal length (f)	48 mm
USB connector type	USB Type-A
USB 2.0 ports quantity	2
VGA (D-Sub) input ports	1
Lamp type	LED
Product color	White
Camera movement	Manual
AC input voltage	100-240 V
Operating voltage	12 V
Power supply type	AC
Power consumption (typical)	17.5 W
Cables included	AC, USB