Elmo MX-P User Manual

22
Hue
Possible（Set value -180～180） Default value: 0
✔
Saturation
Possible（Set value 0～31） Default value: 10
✔
Definition
Possible（Set value 5～15） Default value: 10
✔
Gamma
Possible（Set value 100～200） Default value: 160
✔
WhiteBalance
Auto/Manual（Set value 2000～8000）
Default setting: Auto 6500
✔
Backlight
ON/OFF Default setting: OFF
✔
Exposure
Auto/Manual（Set value -10～1）
Default setting: Auto -4
✔
Low-light
ON/OFF Default setting: OFF
✔
Color Mode
Normal/Gray/Negative/Black-and-White
Default setting: Normal
✔
Scene Mode
Normal/Document Default setting: Normal
✔
Priority Mode
Binned/Resized Default setting: Resized
✔
NoiseReduction
Auto/Manual（Set value 0～10）
Default setting: Auto 0
✔
Anti-flicker
ON/OFF Default setting: OFF
✔
Factory setting
Possible
✔
■ILLUMINATION DEVICE
■FUNCTION
Item
Specifications
Illumination
White LED
Item
Specifications
USB
USB 2.0 compliant ／ USB 3.0 compliant
Transfer speed
USB3.0 Super Speed (5Gbps)
USB2.0 High Speed (480Mbps)
※The actual transfer speed may vary depending on the performance
of your computer and the status of the USB bus.
Operating
temperature
0℃～+40℃
Humidity
30～85％ (No condensation）

Elmo MX-P Specifications

General

Auto focus	Yes
Digital zoom	16 x
Shooting area (WxD)	373.3 x 281.9 mm
Lamp type	LED
Product color	White
Sensor type	-
Maximum frame rate	60 fps
Optical sensor size	- \
Supported graphics resolutions	1920 x 1080 (HD 1080), 3840 x 2160
Interface	USB 3.2 Gen 1 (3.1 Gen 1)
USB connector type	Micro-USB B
VGA (D-Sub) output ports	1
Operating voltage	5 V
Power supply type	DC
Power consumption (typical)	4.6 W

Weight and Dimensions

Depth	81.2 mm
Width	324.9 mm
Height	302 mm
Weight	544 g
Dimensions folded (WxDxH)	289.5 x 81.2 x 22.8 mm