32
3. Right Needle
(Red Threading Route)
Insert thread between red tension discs. Pull
thread down, over and up to the thread take up
lever. Pass thread over take up lever and down to
thread guide.
Insert thread into right side of thread guide.
Thread right needle from front to back.
Place thread under presser foot.
4 4
3
2
3
2
3
2
3
4
2
3
44
3
2
4
3
2
When threading the antenna guide, bring the
thread up from back to front.
Bring thread down to thread guide on top of
machine; slip thread under hook from right to
left. Go under guide, up over and around the
pre-tension disc to make an "S" curve.
To Next Page
Loading...
