44
Test Sewing
To ensure that the threads are properly inserted
into the tension discs, thread the machine and
raise the presser foot. Set all tension dials to 0
and pull threads forward about 10 cm (4"). Reset
the tension dials for sewing.
Close the front cover by pushing it up; it
automatically engages to the sewing position.
Close the side cover by pushing it up until it locks
into place.
Attach the waste tray to catch fabric scraps that
are cut off. Push the waste tray under the front of
the machine and slightly to the left towards the
side cover.
Closing Front and Side Covers
Checking the Tension Discs
Waste Tray
Controlling Sewing Speed
Sewing speed varies with the foot control. The
harder you press on the foot control, the faster
the machine runs.
Safety System
The machine will not operate when the front cover
is open.
1
.
5
2.5
cm
1
2
5
8
1
i
n
c
h
To Next Page
Loading...
