40
FLATLOCK 3
Three threads form an unbalanced stitch that can
be pulled open into a flat seam. The seam
resembles the exposed stitch seen on ready-to-
wear sweatshirts and knit sportswear.
Yellow tension (upper looper): 5
Green tension (lower looper): 8
Blue tension (left needle): 1
Differential Feed: 1
Stitch Length: N
Upper Cutting Blade: Disengaged
Stitch Width Finger: N
Cutting Width Dial: 5.5
Three threads form a balanced stitch that is a
great narrow edge finish.
Common Uses
Hemming method for scarves, napkins
and ruffles.
Construction method for undergarments
made of lightweight knit fabrics.
MACHINE SETUP:
NARROW HEM 3
MACHINE SETUP:
Common Uses
Construction method for bulky knitwear.
Decorative accent.
Yellow tension (upper looper): 4
Green tension (lower looper): 4
Red tension (right needle): 4
Differential Feed: 1
Stitch Length: 1.5-2
Upper Cutting Blade: Engaged
Stitch Width Finger: R
Cutting Width Dial: 5.5
To Next Page
Loading...
