Threading the Machine
j
Raise the presser foot.
k
Press the key until the needle is in an up posi-
tion.
l
Pull the thread around the upper thread guide.
m
Guide the thread down and around the check
spring holder.
n
Firmly pull the thread from right to left, over the
take-up lever and down into the take-up lever
eye.
o
Proceed down through the lower thread guide.
p
Slide the thread to the left behind the needle bar
thread guide.
Thread the needle from front to back manually or
use the built-in needle threader.
19
1
2
3
4
5
6
7
3
4
5
6
7