46
z x
c v
b
n
.
m
Celebration Designs
You can make your own ag garland with the celebration
designs.
z
Select the design list by hoop size and select the hoop
SQ20b.
Select design pattern SQ20b-39.
x
Edit your pennant design in the editing mode.
c
Press the OK key to open the ready to sew window.
Set the fabric in the hoop and attach the hoop to the
carriage.
Press the start/stop button to sew.
v
Remove the hoop from the carriage when nished
sewing. Remove the fabric from the hoop.
Cut out the pennant design along the outer seam.
b
Fold back the top of the pennant to the wrong side of
the fabric as shown.
Use press cloth and Iron the folded edge.
n
Sew the folded edge or paste the wrong side of the
folded edge with a double-sided tape or glue.
Be sure to leave the space to pass the cord.
m
Pass the cord through the hole as shown.
,
Cut the fabric to the same size as the pennant design.
Sew the fabric to cover the back of the pennant.
.
Repeat the procedure above and make your own ag
garland.
,
To Next Page
Loading...
