62
Oil the lower shaft supporter (front)
q
w
r
Oil the lower shaft supporter (rear)
q
Remove the cap
q
and setscrew A
w
with a screwdriver.
Stand the machine so that the handwheel side comes to
the underside of the machine.
Insert the screwdriver from the bottom hole of the thread
cutter cover. Loosen the setscrew B
e
.
Remove the thread cutter cover
r
.
q
Cap
w
Setscrew A
e
Setscrew B
r
Thread cutter cover
Stand the machine so that the handwheel side comes to
the underside of the machine.
Remove the cover
q
on the underside of the machine
with a screwdriver.
q Cover
e
NOTE:
Be careful not to damage any parts when raise the
machine.
NOTE:
Be careful not to damage any parts when raise the
machine.
Oil the arrow point (felt) as indicated in the illustration.
Oil the arrow point (felt) as indicated in the illustration.
To Next Page
Loading...
