ELNA TX - Zigzag Stitch

iacnr
Sewing with the
Zigzag Stitch
Satin
Stitch
Use the sewing foot.
Use the embroidery foot.
1 Leave the stitch width dial
at "0" and To change
the foot, see pages 8-9.
2 Slide the selector
to zigzag " ", green.
5 By selecting a stitch width between
1 and 4 and a
Turn
the
stitch
width
dial
to
4, green
zone.
stitch
length
between
/
and
VA
you
will
sew
a
beautiful satin stitch. ft's ideal for the
hems of
3 Turn
the stitch length dial to between 1
and 2, sheets, pillow-cases,
table-cloths, cushions, etc.
green zone.
4 You are
now ready to sew the zigzag stitch.
You
can set the width and length of your zigzag
stitch at any position
desired between 1 and 4. Tapered
Satin Stitch
This
stitch is often used for overcasting, sewing
on
patches, setting
elastic,
sewing
garments
and
6
if you turn
the stitch
width dial
slowly by
hand
underwear
made of
jersey fabrics,
blind
hems in
between
1-4-1 while
your EIna-tx
is running
fast,
woollens, etc. you will sew a satin stitch tapered as you fancy. e
25