ELNA TX - Overcasting Stitch or Three-step Zigzag; Elastic Blind Stitch or Edging Stitch

Overcasting
Stitch
or Three-step Zigzag
Use the sewing
foot.
. Turn the stitch width
dial to '4", green
zone.
1-2With the stitch
width dial at "0",
slide the selector
e Turn
the stitch length dial
to "1-1l'A
"
, green
zone.
to
the three-step
zigzag
"
E ", green.
You
are then
ready
to sew
the blind
stitch,
- see
2 Turn
the stitch width dial to
"4", green zone.
also pages
38-39.
3 Turn
the stitch length
dial to "2", green zone.
6 The length of this
stitch can also be
reduced to
4 You are
then ready to sew
the three-step zigzag,
between
'h and /4 to
produce a fancy satin
stitch.
You can set
the width and length
of your three-
Use
the embroidery
foot.
step zigzag at any position you desire
between This stitch has
many uses, viz.:
"1" and
"4". This stitch is
highly appreciated for
Its strength
and elasticity and
is suitable for
Edging
stitch: for edging
table-cloths,
overcasting,
for setting
elastics, sewing jersey
and
serviettes,
fancy insertions,
stretch
fabrics, patching In
a single operation,
reinforcing
buttonholes.
sewing
edge-to-edge.
Blind stitch and
Elastic blind stitch:
for woollens,
stretch fabrics, etc.
Elastic
Blind Stitch or Edging
Stitch Elastic
shell hem: for underwear,
In jersey fabric.
5
With the stitch
width dial
at "0", slide the
selector
for example.
o k
ia
to the
edging stitch
"green
zone.