User Manual – 2D Barcode Scanner (Zebra)
UM600xxx Draft, page 24 of 40
User Preferences Parameter:
Trigger Mode Settings
Parameter # 138
SSI # 8Ah
Scan one of the following bar codes to select a trigger mode for the engine:
Standard (Level)
A trigger press activates decode processing. Decode processing continues until the barcode decodes, you release the trigger.
This is the default setting for the scanner out of the box.
Presentation (Blink)
The engine activates decode processing when it detects a bar code in its field of view. After a period of non-use, the LEDs turn
off until the engine senses motion.
Auto Aim
The engine projects the aiming pattern when it senses motion. A trigger press activates decode processing. After two seconds of
inactivity the aiming pattern shuts off.
To Next Page
Loading...
Need help?
General