User Manual – 2D Barcode Scanner (Zebra)
UM600xxx Draft, page 5 of 40
Section 1: Introduction
Product Description
The Elo 2D Barcode reader kit is an optional attachment for Elo monitors, Android All-in-one computers, and Windows
All-in-one computers. The device is USB based and capable of reading most common types of barcodes. The reader
is configurable to work with most applications.
• The SE2707 contains the SE4710 engine and decoder with USB interface.
• The SE4720 is with companion with PL5000 decoder with USB interface.
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to maximize the life of your
unit and prevent risks to user safety. See Section 7 for more information on safety.
This manual contains information that is important for the proper setup of the scanner. Before setting up and powering
on your new scanner, read through this manual, especially the Installation, configuration, and Operation chapters.
On this user manual only the most common parameters settings will be covered. For additional parameter and
symbologies settings, please download the User Guide (SE2707 & PL5000 Decoder for SE4720) from the
Zebra website.
To Next Page
Loading...
Need help?
General