Elo TouchSystems IDS ET3203L - Page 16

User Manual – IDS ET3203L/ET4303L/ET5053L
UM600265 Rev. C, page 16 of 33
Default: Standard
HDMI Full Color
Range
When enabled, displays full color range of HDMI (0-255)
When disabled, displays the legacy color range (16-255)
Default: enabled
Audio
Audio Selections
Audio Input: Sets where audio should play from
When set to Internal-PC, the audio comes out from the line out on the ECMG4
(ECM Docking)
When set to Monitor, the audio comes out from the video source on the monitor
Audio Output: Sets where audio should play for
When set to Speaker, the audio output to the speaker
When set to Line Out, the audio output to the line out on the monitor
Mute: enables or disables the audio
Default Off
Volume: Adjust the audio from 0 – 100
Default: 50
Power
Power Loss
Behavior
When power to the monitor is lost and regained, the behavior that is chosen will be
executed.
Always On
Always Off
Last State
Default: Last State
Power Lock
When enabled, the monitor will remain ON even if the power button is pressed.
If this feature is enabled and power to the monitor is lost, when power is regained,
Power Lock is still enabled.
Default: Disabled
Energy Savings
Mode
When Enabled, the monitor must adhere to Energy Star regulations.
Default: Enabled
Power Status
Light
Enable or disable the power status light
Default: Enabled
Auto Display
Wake Up
When Enabled, the light sensor can be used to wake the monitor from sleep mode
Default: Enabled
Time
Time Set
Option to set the current time
On/Off Schedule
Set the monitor to turn off and on at specific times.
Default: Everyday