2 Flatpack2 Rectifier & Converter Modules
10 User’s Guide Flatpack2 Rectifier & Converter Modules, 350002.013, 8v1-2013-08
Module Options
The Flatpack2 modules are available in various options, offering different performance
and characteristics. Modules used in industrial applications are always keyed at
factory. Read also chapter “Keying Scheme ~ Modules and Power Shelves”, page 19.
Heat Management ~ FB or BF Air Flow
The Flatpack2 module options are always to be installed in power
systems designed for Front-to-Back Air Flow heat management,
except for modules specified for Back-to-Front Air Flow, e.g.
parts 241115.110 and 241115.115, refer to page 13.
CAUTION:
Never install Flatpack2 modules in power shelves with different output voltage than the module’s. The module’s
output voltage and the power system’s output voltage must always be the same.
A keyed power shelf will only allow modules that are keyed ( ) for this specific shelf, to be plugged in the shelf.
CAUTION:
Do not install modules with Back-to-Front heat management in power systems
designed for Front-to-Back heat management, or vice versa; otherwise the product
guaranty becomes invalidated.
To Next Page
Loading...
