Eltek MultiCharger 1500 - Charging process; Battery preparation; Charging of a battery installed in the vehicle; Charging of a battery outside the vehicle

2280073 Rev.1 Page 5
Page
10.4 Set voltage limits 39
10.4.1 Set Ua max. 12V 39
10.4.2 Set Ua min. 12V 39
10.4.3 Set Ua max. 24V 39
10.4.4 Set Ua min. 24V 39
10.5 Output-current limits (I-limits) 40
10.5.1 Set I-limit CHRG12V 40
10.5.2 Set I-limit CHRG24V 40
10.5.3 Set I-limit EPS 12V 40
10.5.4 Set I-limit EPS 24V 40
10.6 Set process times 41
10.6.1 Set switch back time 41
10.6.2 Set maximum charging time 41
10.6.3 Set I-limit 2 41
10.7 Set cable (wire) resistance 41
10.8 Turn on/off autostart 42
10.8.1 Autostart now enabled and Autostart now disabled 42
10.9 Error log 42
10.9.1 Error 0 - 9 42
Derating 43
Factory (default) settings 44
Select language 44
Technical data 45
Appendix A Status and error descriptions 47