____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 13
Operating temperature range
2.5 Design
2.5.1 NTU-2V
NTU-2V devices are designed as 122×96×32 mm desktop device in a plastic housing.
The figure 4 shows the NTU-2V rear panel layout.
Fig. 4—NTU-2V Rear Panel
The connectors and controls located on the rear panel of NTU-2V are shown in the table .
Table 3—Description of the LEDs and Controls Located on the Rear Panel
RJ-11 connector for analogue phone connection
RJ-45 10/100/1000Base-T port for connection of network devices
RJ-45 100Base-TX port for connection of network devices
SC port (socket) for connection to PON with GPON interface