ELTEX NTU-2V - Ntu-Rg-1402 G-W

____________________________________________________________________________________
____________________________________________________________________________________
18 NTU Optical Network Terminals
Table 9 – Description of the controls located on the bottom panel
Bottom Panel Element
Description
F
a functional key that reboots the device and resets it to the
factory settings
2.5.4 NTU-RG-1402G-W
The NTU-RG-1402G-W subscriber terminal is designed as a desktop device in plastic housing.
The Figure 10 shows the NTU-RG-1402G-W rear panel layout.
Fig. 10—NTU-RG-1402G-W Rear Panel layout
The connectors and controls located on the rear panel of NTU-2W are shown in the table .
Table 10—Description of the LEDs and Controls Located on the Rear Panel
№
Rear Panel Element
Description
1
On/Off
Power supply button
2
12V
Power adapter connector
3
PON
SC port (socket) for PON with GPON interface
4
USB
2 connector for external drives and other USB devices
5
Phone 1..2
2 RJ-11 ports for connection of analogue phones
6
LAN 10/100/1000 1..4
4 RJ-45 ports for connection of network devices
The figure 11 shows NTU-RG-1402G-W side and front panels.