ELTEX NTU-2V - 4 Ntu-Rg-1402 G-W Configuration Via Web Interface. User Access

____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 33
4 NTU-RG-1402G-W CONFIGURATION VIA WEB INTERFACE. USER ACCESS
Device configuration requires accessing the device through a web browser (a program displaying
hypertext documents) such as Firefox or Google Chrome. To do this, enter the device IP address into the address
bar of the web browser (the factory default IP —192.168.1.1, subnet mask—255.255.255.0).
When the IP address is entered, the device will request a user name and a password.
User name: user, password: user.
To prevent unauthorised access to the device, we recommend to change the password (see section 4.6.5
The Passwords Submenu. Access Control Settings (password settings)).
Given below is a general view of the device configuration window. A navigation tree for object
configuration menu is located to the left, while the edit pane for the settings is located to the right.