ELTEX NTU-2V - Ntu-Rg

____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 9
– QoS;
– IGMP snooping;
– IGMP proxy;
– Parental Control.
– Wi-Fi:
– 802.11b/g/n standards.
– Firmware updates via web interface, TR-069, OMCI.
– Remote monitoring, configuration, and setup:
– TR-069;
– Web interface;
– OMCI;
– Telnet.
Fig. 2 shows a diagram of the NTU-2W equipment application diagram.
Fig. 2— Application diagram of NTU-2W
2.3.3 NTU-RG
The device has the following interfaces:
 2 RJ-11 ports for connection of analogue phones
 1 PON SC/APC port for connection to operator's network.
 4 Ethernet LAN RJ-45 10/100/1000Base-T ports for connection of network devices
 1 Wi-Fi transmitter/receiver 802.11b/g/n;
 2 USB 2.0 ports for external USB or HDD storages.
The terminal uses an external adapter for 220V/12V power supply.
The device supports the following functions:
 Network functions:
– bridge or router mode;
– PPPoE (PAP, CHAP, MSCHAP authentication);