ELTEX NTU-2V - Ping Submenu. Checking the Availability of the Network Devices; The Passwords Submenu. Access Control Settings (Password Settings); The System Log Submenu. Display and Configuration of the System Log; The Configuration Submenu. System Log Configuration

____________________________________________________________________________________
____________________________________________________________________________________
NTU Optical Network Terminals 63
– Time zone offset – set the time zone according to UTC.
Choosing the Other option in the drop-down list of servers activates a window to the right
where the address of the time server can be manually entered.
4.6.4 Ping Submenu. Checking the Availability of the Network Devices
The menu is intended for using the Ping utility to check availability of the network devices connected to
the router.
To test the availability of the connected device, enter its IP address into the field and click the Ping button.
Click the TraceRoute button to view the route tracing. Results will be displayed at this page of web configurator.
4.6.5 The Passwords Submenu. Access Control Settings (password settings)
Use this submenu to change the device access password.
To change a password, enter the current password, a new password and then confirm it.
Click the Apply/Save button to accept and save the changes.
4.6.6 The System Log Submenu. Display and Configuration of the System Log
4.6.6.1. The Configuration Submenu. System Log Configuration
Use this menu to configure the router events.