____________________________________________________________________________________
____________________________________________________________________________________
40 NTU Optical Network Terminals
– Voice daemon status – the status of voice daemon;
– SIP Proxy – SIP Proxy address and port;
– SIP Outbound Proxy – address and port of the SIP proxy which will be used to transfer all queries (this
server will be used for routing of SIP Proxy and SIP Registrar queries);
– SIP Proxy – SIP Proxy address and port;
– SIP Account – SIP account (FXS port number);
– Account enabled – FXS port status in configuration;
– Status—connection status;
– Error – SIP server error;
– Response code – SIP server response code;
– Extension – phone number;
– Display name – user name displayed;
– Authentication name – user name authentication.
4.2 The Advanced Setup Menu. Advanced Settings
4.2.1 The LAN Submenu. Configuration of Main Parameters
The menu allows configuration of the main parameters of the LAN interface.
– IP Address—address of the device in local network;
– Subnet Mask—subnet mask;
– DHCP Server (Dynamic Host Configuration Protocol) allows you to configure local computers
automatically in order to work in a network. DHCP server automatically assigns IP address to
each computer within a network;
– Enable— when checked, use DHCP server (receive IP addresses dynamically from the specified range);
– Start IP Address—the first address of the range;
– End IP Address—the last address of the range;
– Leased Time (hour)—time of the address lease (in hours);
– DHCP Static IP Lease—correspondence
between the leased IP addresses and devices' MAC
addresses (mapping). To add a record into the table,
click Add. You can add up to 32 records.
– MAC—МАС address;
– IP address — IP address of the
device.
Click the Apply/Save button to accept and save the changes.
To Next Page
Loading...
