Eltron LAB+ Series - Page 39

P Command - Print
Description This command is used to initiate printing and
control the quantity of forms or labels to be
printed.
The print command clears the image (print)
buffer after command has completed.
The print command also acts as a formfeed
command. A print command issued without
any text or graphics commands loaded prior to
it will print a blank label.
Syntax Pp
1
Parameters p
1
= The number of forms or labels to print.
The maximum number per print command is
99.
Example:
P4↵:prints 4 forms or labels.
980090-001 Rev. B 33
P Command - Print
Description This command is used to initiate printing and
control the quantity of forms or labels to be
printed.
The print command clears the image (print)
buffer after command has completed.
The print command also acts as a formfeed
command. A print command issued without
any text or graphics commands loaded prior to
it will print a blank label.
Syntax Pp
1
Parameters p
1
= The number of forms or labels to print.
The maximum number per print command is
99.
Example:
P4↵:prints 4 forms or labels.
980090-001 Rev. B 33