Eltron LAB+ Series - Page 42

R Command - Margin Position
Description This command is used to adjust the Left and
Top Margins.
Syntax Rp
1
,p
2
Parameters p
1
= Additional left margin in dots. The
default value is 000.
p
2
= Additional top margin in dots. The
default value is 000.
36
980090-001 Rev. B
R Command - Margin Position
Description This command is used to adjust the Left and
Top Margins.
Syntax Rp
1
,p
2
Parameters p
1
= Additional left margin in dots. The
default value is 000.
p
2
= Additional top margin in dots. The
default value is 000.
36
980090-001 Rev. B