15
I
CLASS MEANING 6209 (+ 6009) 6309
YES = the monitor switches on when a panel
call is made (except for 6209)
YES = the green led is managed as
door open indicator
YES = the lock pushbutton is used by the device
NO =
the pushbutton is used externally (only for 6309/P, 6309/CP)
YES =
the stair light pushbutton is used by the device
NO =
the pushbutton is used externally (only for 6309/P, 6309/CP)
YES =
the self-start pushbutton is used by the device
NO = the pushbutton is used externally
(only for 6309/P, 6309/CP)
YES = if the F1 / F2 pushbutton is programmed
directly on a specific panel, only panels 1 to 8
can be programmed
NO = only panels 9 to 15
YES = the device is working in porter
switchboard mode
YES =
the device sends the lock command automatically
when a external speech unit/panel calls, if P6 is closed
YES = group G3 functions only for
external calls
YES = group G4 functions only for
internal calls
YES = eliminates the click sound
when a valid key is pressed
YES = does not activate the call repeated output
for intercommunicating calls
YES = group G1 functions only for external calls
YES = group G2 functions only for internal calls
YES = the monitor / interphone does
not ring for intercommunicating calls
YES = the monitor / interphone does
not ring for calls from panels
YES = After the automatic door lock activation
because of the Serr. Aut. flag with P6 close the
interphone or the video interphone cancels the call.
[NO] The possible automatic door lock does not
make the call end (default).
Usually used for a group master.
YES = the call is accepted, and then the
secondary units ring, even if the group master
has ringtone off and therefore does not ring.
NO = if a group master turns off the ringtone
none rings and there is a warning on the
entrance panel.
YES = the device has no timeout for the
intercommunicating conversation. For it to work
properly, both parties talking to each other must
have it on YES.
NO = (Default) and the intercommunicating
conversation lasts at most 5 minutes.
YES = If it is programmed for a head group, this
latter, at the call reception from the push-button
module type 6120, will inform the other members
that it is ringing. If it is programmed for the group
members, they will answer at the call from a type
6120 to their head group ringing. In this way it is
possible to divide the calls between external,
internal and outdoor calls.
NO = No reaction.
FLAG PROGRAMMING
To Next Page
Loading...
Need help?
General
