Operation
Dips Module for voltage Dips and short interruptions.
The menu offers different test routines for pulsed magnetic field testing.
The Power Fail menu offers different test routines for voltage dips and interrupt testing.
Quick Start
Easy and fast online-operation of the equipment for voltage DIPS and power interruption tests.
Standard
The operator can select between various preprogrammed test routines as required in different standards.
The operator can select the standard routine for 50/60Hz, depend of the measured frequency, testing as per IEC
61000-4-11.
Extended test
The operator can select between various preprogrammed test routines which helps to accelerate testing and
which are very helpful especially during design.
User test routines
The user defined library where all created power fail tests are stored.
Easy Link
Link files library created during the actual session. The user can easy save a test into the Easy Link library. After
switch off the Equipment all Easy Link tests are deleted. Use “SAVE AS USER TEST” for definitive save the test.
To Next Page
Loading...
Need help?
General
