What does Err 05 mean on EMAK EF 95 Lawn Mower?
Err 05 on your EMAK Lawn Mower means the ECU detects an invalid status of the transmission switch. To correct this, switch the ignition off and back on to position 2, then operate the reverse pedal several times.
What does Err 04 mean on EMAK Lawn Mower?
Err 04 on your EMAK Lawn Mower signifies that the ECU detects an invalid status of the box switch. To resolve this, switch the ignition off and back on to position 2, then open and close the box several times.
What does Err 03 mean on EMAK EF 95 Lawn Mower?
Err 03 on your EMAK Lawn Mower indicates that the ECU detects an invalid status of the mower mechanism switch. To solve this, switch the ignition off and back on to position 2, then operate the mower mechanism switch several times.
What does Err 02 mean on EMAK Lawn Mower?
Err 02 on your EMAK Lawn Mower means that the ECU detects an invalid status of the brake switch. To fix this, switch the ignition off and then back on to position 2.
What does Err 01 mean on EMAK EF 95?
Err 01 on your EMAK Lawn Mower indicates that the seat switch ECU detects an invalid status of the seat switch. To resolve this, switch the ignition off, then apply and release load from the seat several times.
What to do if EMAK EF 95 Lawn Mower fill level display does not respond?
If the fill level display on your EMAK Lawn Mower isn't responding, it's likely due to mown grass stuck to the fill level display lever. Remove the mown grass and ensure the lever can move freely.
What to do if EMAK Lawn Mower starter does not work?
If the starter of your EMAK Lawn Mower isn't working, it could be due to a flat or weakly charged starter battery (charge the starter battery), a malfunctioning safety switch on the operator’s seat (sit correctly or the switch is defective), a faulty safety switch on the brake pedal (press the brake pedal down fully), the mower mechanism being switched on (switch off the mower mechanism), a blown fuse on the (+) cable of the starter battery (check and replace the fuse if necessary), grass that is too long or wet (correct the cutting height and move back to clear the mower mechanism), or a blocked discharge channel/mower deck (clean the discharge channel/mower deck after stopping the engine and removing the ignition key).
Why EMAK Lawn Mower engine does not start?
The EMAK Lawn Mower engine might fail to start due to several reasons: a lack of fuel (in this case, fill the tank, check the tank bleeding, and the fuel filter), poor or contaminated fuel (always use fresh fuel from clean containers and clean the carburettor), a contaminated air filter (clean the air filter according to the engine manufacturer's instructions), no ignition spark (clean or replace the spark plug, check the ignition cable and system), or too much fuel in the engine combustion chamber (unscrew and dry off the spark plug).
General| Brand | EMAK |
|---|---|
| Model | EF 95 |
| Category | Lawn Mower |
| Language | English |
Describes warning symbols for safe operation and hazard identification.
Provides model, power, weight, and manufacturer details for the tractor.
Lists and describes primary mechanical and operational parts of the tractor.
Explains dashboard elements and engine speed control.
Explains ignition key functions, display modes, and dashboard indicator lights.
Describes the function and use of speed pedals and the parking brake.
Guides for starting, stopping, and moving the tractor.
Details on adjusting cutting height and mowing techniques.
Explains the manual's purpose and general warning icons.
Lists manual sections and highlights key safety information.
Covers user alertness, planning, and adult operation requirements.
Details PPE, hearing protection, and keeping others away.
Covers slope operation, modifications, and proper use limitations.
Explains hazard symbols and how to read the machine's dataplate.
Lists and describes primary mechanical and operational parts.
Instructions for unpacking and preparing the tractor for use.
Explains the meaning of various dashboard indicator lights.
Describes the function and use of speed adjustment pedals and the brake.
Lists forbidden actions and how to adjust the cutting deck height.
Covers safety device integrity, planning, and seeking expert assistance.
Guidelines for attaching and using towing hitches and accessories.
Detailed instructions and warnings for mowing on inclines and uneven terrain.
Precautions to ensure children's safety when operating or near the tractor.
Step-by-step guide for adding oil and fuel with critical safety warnings.
Importance of tyre pressure for cutting and instructions for attaching the grass catcher.
Procedures to verify the correct operation of safety interlock switches.
Procedures to test seat, catcher, and discharge safety switches.
Basic steps for using the tractor and preparing the work area.
Guides for engine management and moving the tractor without the engine running.
Procedures for disengaging blades and emptying the grass catcher.
Information on mulching options and general lawn care advice.
Steps to complete mowing, shut down the engine, and clean the tractor.
Instructions for cleaning deck, engine, discharge channel, and mowing system.
Safety rules and methods for transporting the machine securely.
General safety rules and how to access mechanical parts for maintenance.
Lists maintenance tasks and their recommended frequencies.
Instructions for engine oil, filter, and spark plug maintenance.
Details on lubrication points and the recommended lubrication schedule.
Guidelines for safe battery handling and charging.
Precautions for battery handling and procedures for wheel replacement.
Guidelines for blade condition, replacement, and sharpening.
Advice on minimizing environmental impact during machine use.
Instructions for attaching and using the towing hitch.
General safety precautions and operating rules for towed accessories.
Procedures for using the trailer and its routine maintenance.
Includes weight, dimensions, turning circle, and electrical system details.
Details cutting height, speed, grass-catcher capacity, and noise/vibration levels.
Details on directives, harmonized standards, and conformity evaluation.
Covers warranty period, coverage, and general exclusions.
How to make a claim and situations that void the warranty.
Causes and solutions for engine starting and starter problems.
Fixing issues related to abnormal or reduced engine speed.
Solutions for vibration, movement, and rough cut issues.
Diagnosing grass catcher fill level and display errors.
Explains specific error codes and how to clear them.
To Next Page
