-
in the indicated order.
-
ner.
3.3
3.4
3.5
Apply silicone grease to the terminals and
is in place.
Always fully charge the bat-
tery according to the instructions in the battery
booklet.
To prevent the safety device in
the electronic circuit board from cutting in, never
start the engine until the battery is fully charged!
4.1
4.2
Regulates the engine’s r.p.m. The positions are
symbols:
«CHOKE» cold start
«FAST».
4.2a
4.3
«START» engages the starter motor.
- On being released at the «START» position,
4.4
«A
«
position «A».
To Next Page
Loading...
