you alternate the cutting in both directions.
-
probable causes are either badly sharpened
-
means.
6. MAINTENANCE
6.1
You must go to a special-
ized Service Centre or contact your Dealer if
the following are malfunctioning:
– the brake;
– the cutting means engage and disengage
functions,
– switching the drive to forward or reverse
gears.
6.2
-
Hours
1. MACHINE
1.1
Cutting means positioning and sharpening
1.2
Replacing cutting means
1.3
1.4
Transmission belt replacement
–
1.5
1.6
Replacing the cutting means control belt
–
1.7
1.8
1.9
To Next Page
Loading...
Need help?
General
