System component description
15
EMC® VNX5300™ Hardware Information Guide
DME front view The front of the Block and File VNX5300 platform, the DME contains two enclosure
status (power and fault) LEDs (Figure 8). Table 6 describes the DME power and fault
LEDs.
Note: Figure 8 is a graphical representation of the Block and File VNX5300 platform DME with
four power supply/cooling (fan) modules and two CPU modules installed.
Figure 8 Data Mover enclosure LEDs
CPU LEDs
The CPU modules in the DME contain the power, fault, and unsafe-to-remove LEDs.
Figure 9 shows the CPU LEDs and Table 7 on page 16 describes them.
Figure 9 CPU LEDs
AC
AC
AC
AC
Data Mover Enclosure
fault LED
Data Mover Enclosure
power LED
CNS-001667
Table 6 Data Mover Enclosure LEDs
LED Color State Description
Power Blue On DME is powered up and all the FRUs in the enclosure are operating
properly
— Off DME is powered down.
Fault Amber On A FRU failed within the enclosure.
— Off DME operating normally.
AC
AC
AC
AC
CPU power LED
CPU fault LED
CPU unsafe to
remove LED
CNS-001669
To Next Page
Loading...
