EMC VNX5500 - Data Mover CPU Module

Data Mover enclosure
EMC VNX5500 Parts Location Guide 19
Data Mover CPU module
To access the Data Mover CPU, you must first remove the power supply/cooling fan
modules, as shown in Figure 16.
Figure 16 Example of removing the Data Mover power supply/cooling fan module from the Data
Mover enclosure
Figure 17 shows the Data Mover power supply/cooling (fan) module removed from the
front of the 2U Data Mover enclosure.
Figure 17 Example of the Data Mover CPU being removed from a Data Mover enclosure
Figure 17 shows the Data Mover CPU partially removed with the two power supply/cooling
(fan) modules set aside. The part number label for the Data Mover and the CPU module in
Figure 17 are listed in Table 10 on page 20.
CL3972
1
1
1
2
2
2
2
1
1
1
1
1
2
2
2
Data Mover part number (P/N) label
Power supply/cooling fan modules
Data Mover enclosure
Data Mover CPU
CNS-001683
Data Mover CPU
part number (P/N) label