EMC VNX5500 - Two-Port 10-Gb;S Optical I;O Module

I/O modules
EMC VNX5500 Parts Location Guide 33
Two-port 10-Gb/s optical I/O module
Figure 25 shows the part number label location on the two-port 10-Gb/s optical or active
Twinax I/O module (labeled 10 GbE v3 on the latch handle).
Figure 29 Example of the two-port 10-Gb/s optical I/O module
Note: This two-port 10-Gb/s optical I/O module requires VNX OE for File version 7.1 or
later.
Table 19 shows the part number label location, part number, description, and whether it
is a FRU or CRU.
Part Number (P/N) Label
CNS-001700
Table 23 Two-port 10-Gb/s optical I/O module part number
Part number label
location
(Figure 25) Part number Description FRU CRU
303-195-100C-01 Two-port 10-Gb/s Optical I/O
module
