EasyManua.ls Logo

Emcotec DPSI V-Match User Manual

Emcotec DPSI V-Match
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Bedienungsanleitung

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Emcotec DPSI V-Match and is the answer not in the manual?

Emcotec DPSI V-Match Specifications

General IconGeneral
BrandEmcotec
ModelDPSI V-Match
CategoryRecording Equipment
LanguageEnglish

Summary

DPSI V-Match Functionality

DPSI V-Match Programming

Changing Servo Direction

Reverses servo direction by holding a magnet near the 'PRG' position. Stores permanently.

Calibrating Servo Center

Sets the servo's neutral position using the transmitter stick and magnet.

Calibrating End-Limits

Adjusts the servo's maximum travel range at both ends.

Deleting all Programming

Resets all saved programming settings to factory defaults.

Additional Hints for DPSI V-Match

Adapting Several Servos

Chains multiple DPSI V-Match units to synchronize more than two servos.

Changing the Model

Instructions for resetting settings when using the device in a new model.

Sequence of Programming

Guidance on the recommended order for programming servo settings.

Limiting Tuning Range

Explains servo travel limits and the 3-point curve adjustment.

DPSI V-Match Technical Data

DPSI V-Match Warranty Information

Related product manuals