Emcotec RC Electronic DPSI RV Mini 5 Magic

Need help?

Do you have a question about the Emcotec RC Electronic DPSI RV Mini 5 Magic and is the answer not in the manual?

Summary

Characteristics

Detached Voltage Regulators

Details separate voltage regulators for receiver and servos, allowing selectable output voltages.

Servo-Matching (Magic option only)

Error Detection and Indication

IVM (Intelligent Voltage Monitoring)

Explains intelligent voltage monitoring with acoustic and optical error indication.

Safety Features of DPSI RV Systems

Mounting Hints and Programming

Connecting the Switch Actuator

Connecting the Receiver

Selecting Batteries

Setting the Voltages

Programming the Batteries

Guides on programming the battery type for intelligent voltage monitoring.

Connecting Servos

Servo-Matching

Programming

Explains the process of programming slave servos using the magnet and transmitter.

Changing Servo Direction

Setting Servo Center

Setting End-Limits

Connecting Optional Products

Operating

Error Indication

Overload (short circuit):

Describes overload/short circuit error signal and recommended action.

Battery empty:

Details the error signal for empty batteries and critical implications.

Voltage Regulator defective:

Explains the error signal for a defective voltage regulator and repair recommendation.

Battery Malfunction:

Describes the error signal for battery malfunction (e.g., broken cable, loose contact).

Low Voltage battery 1:

Details the error signal for low voltage on battery 1 and recommended actions.

Low Voltage battery 2:

Details the error signal for low voltage on battery 2 and recommended actions.

Safety Directions

Technical Data of DPSI RV Mini-Systems

Warranty