DPSI RV Mini Family Operating Instructions Version 1.0
Page 12 of 54
5. Characteristics
With the DPSI RV Mini - systems a new dimension is reached as far
as safety and comfort about current supplies for RC receiver
equipment is concerned:
Dual current supply (battery switch)
Separate electronically high power switches for both batteries
Up to 50A peak current load
Switching without microcontroller and therefore failsafe (CSHC=
Controller-less Self Holding Circuitry)
Possibility to connect an external LED voltage indicators onto switch
actuator
Due to voltage regulators usage of all battery types available
Selectable output voltage for receiver
Selectable output voltage for servos
Usage of 7.4V servos unlimited
Compliant to all RC receiver-equipment's manufacturers
specifications
Continuously constant servo power due to constant voltage supply
Servo current distribution for heavy loaded servos in system
Optimal recognition and conditioning of servo signals from 2.7V
receivers
Short-circuit proof servo pulse amplifier in current-saving APP-
Technology (Advanced Push Pull) for each individual servo
HFIB (High Frequency Interference Blocking) suppression of induced
HF interference caused by long servo cables (for each individual
servo)
Built-In "V-cable“ for connecting two servos per channel
Servo-matching for built-in "V-cable“ (in Magic versions)
Failsafe function of programmable servos (in Magic versions)
Optically and acoustically warnings on malfunctions, e.g. battery low
voltage or total battery loss
IVM (Intelligent Voltage Monitoring) – intelligent voltage monitoring
with acoustically and optically state indication for six different battery
types (programmable)
Protection of receiver against the so-called "Dynamo Effect“
(feedback of servo counter electromotive force)
Cable free system, i.e. all lines are pluggable and therefore
replaceable at any time
Special grounding concept for flawless operation and highest safety
To Next Page
Loading...
