DPSI RV Mini Family Operating Instructions Version 1.0
Page 4 of 54
1. Preface
With a DPSI RV Mini dual current supply from EMCOTEC you
purchased a high grade, modern and secure product for your remotely
controlled model. We appreciate your trust and assure you that you
made the right choice!
Long lasting experience for years in development and manufacturing of
electronically systems as well as the knowledge of the world’s best
model airplane pilots has influenced the development. All products are
developed by experienced engineers and manufactured at EMCOTEC
GmbH in Germany on our own production line. Extensive optically and
electronically end tests for every system, which leaves our house,
assure that you, our customer acquire an absolute reliable product,
which considerably increases the reliability of your valuable RC-Model.
Of course, the products not only have been tested extensively in the
laboratory, but also went through intensive flight-testing. Extensive
series of tests with especially in house developed data loggers have
been accomplished to measure the real current consumption in model
airplanes. Like done in the automobile industry FMEA (Failure Mode
and Effect Analysis) reduces the possibility of damage and malfunction
on operating errors to a minimum.
Hint:
We kindly ask you to read these operating instructions carefully and to
observe the installation hints. Thus, errors can be avoided in advance.
We are all ears for your wishes and questions. Challenge us!
Bobingen, October 2008
The Staff of EMCOTEC GmbH
To Next Page
Loading...
