DPSI V-Match Operating Instructions Version 1.0
Page 11 of 16
3. Additional Hints
These additional hints are valuable for the ambitious user who likes to
know more about the functions of the DPSI V-Match by explaining its
behavior under certain circumstances.
3.1. Adapting several Servos
If more than two servos need to be synchronized (e.g. three aileron
servos) two DPSI V-Match can be chained one after another. This
means: the input of the second DPSI V-Match connects to the MSTR
output of the first DPSI V-Match.
Now, a SLAVE output is available at the first DPSI V-Match, a MSTR
and a SLAVE output at the second one. Both SLAVE servos can now
be independently set up.
To Next Page
Loading...
