Emec MAX5 - Timer 2 to 5 Configuration; Timer 2-5 Output Selection; Timer 2-5 Start Time (Ton); Timer 2-5 End Time (Toff)

26
TIMER 2 (to 5)
Timer2 is usually used for activities such as a “anti algae treatment”. Once the function is enabled (move wheel on
disable, click and then rotate) there are 6 main parameters to set.
Timer starts at a specied time of the year and can be repeated every xx days.
Out1 and Out2.
Choose one or both two related outputs (not previously assigned , chlorine output exception) that will be enabled during
set time.
Ton
This is the activity starting date and time.
Toff
This is the activity ending time.
LOOP
These are the day-countdown in which activity will be repeated.
E.g.: LOOP 03 means that every three days activity will be repeated at specied time.
Anti algae treatment is a process used in many swimming pools, water wells, springs, and other water sources for killing and preventing all pool algae types.
g. 32