Introduction
Parameter
x.00
Parameter
description format
Keypad and
display
Serial
communications
CT Modbus
RTU
PLC Ladder
programming
CTSoft Menu 0
Advanced parameter
descriptions
Menu 11
Commander SK Advanced User Guide 151
Issue Number: 9 www.controltechniques.com
The PLC ladder program maximum scan time parameter gives the longest scan time within the last ten scans of the PLC ladder program. If the scan
time is greater than the maximum value which may be represented by this parameter the value will be clipped to the maximum value.
The LogicStick can be used as a SmartStick to store a parameter set at the same time as storing a PLC ladder program.
The LogicStick should be fully inserted or removed from the drive before a drive reset is performed.
11.49 Unused parameter
11.50 PLC ladder program maximum scan time
Coding
Bit SP FI DE Txt VM DP ND RA NC NV PT US RW BU PS
111 1
Range 0 to 65535 ms
Update rate User program execution period
To Next Page
Loading...
Need help?
General
