Emerson DV - 121 - Connecting External Speakers; Power Connection

The external
speaker must be
more than 8 .Ω
CONNECTING AN EXTERNAL SPEAKER
DV-121 has external speaker output, you can
speaker on the rear panel extra speaker
1. Connect one end of speaker cable to the speaker out on
the rear panel of the DV-121.
2. Set the speaker switch to EXTERNAL.
connect extra
output as below:
Note
Note
: INTERNAL and EXTERNAL speaker can't be used
: External speaker must be more than 8ohm.
at the same time.
Speaker 1 Speaker 2
POWER CONNECTION
When you have completed all other connections, plug your system's power cord into a standard AC outlet.
Note:
Warning: To avoid electrical shock, do not connect the system to AC power until all other connections are completed.
Caution: Make sure the voltage of the AC outlet matches the requirement of your karaoke system.
AC power cord
11
CONNECTIONS
For US 110~120V
For EU 220~240V