SETTING UP THE VCR
This feature allows the VCR to automatically start playing when you insert a tape
with the safety tab removed. Press 1 to switch between ON or OFF.
•Select ON if you want a tape with its safety tab removed to start playing
automatically when the tape is inserted.
•Select OFF if you do not want a tape with its safety tab removed to start playing
automatically.
This feature controls whether the TV/VCR switch changes automatically to the
VCR mode when the VCR is turned on. Press 2 to switch between ON and OFF.
•Select ON if you want the VCR to switch to the VCR mode when the VCR is
turned on or a cassette is inserted. This only applies if you connect the ANT. IN
and RF OUT jacks of your VCR and TV and watch your VCR on channel 3 or 4
of your TV.
•Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV's video input and you don't want your antenna/cable
signal interrupted by the VCR.
AUTO PLAY
35
AUTO TV/VCR
To Next Page
Loading...
