Emerson EV477 - Checking Timer Programs

ON-SCREEN TIMER PROGRAMMING (CONTINUED)
CHECKING TIMER PROGRAMS
CANCELLING AND REVIEWING TIMER PROGRAMS
32
Press the MENU key and select Timer Recording mode.
Press the number key 2 for Review/Cancel Programs and
the program screen will appear.
1
Select the Timer Recordings mode in the MENU
mode and press the number key 2 to review pro-
grams.
1
Press the MENU key to cycle through the programs.
When the program contents to be erased is dis-
played, press the CLEAR key to cancel it.
To stop a Recording in progress, press and hold the
Stop key approximately 5 seconds.
2
MENU
No programs have
been entered.
Continue
If no programs have been programmed, the following
screen will appear.
2
PROGRAM1 (ONE TIME)
Channel 06 Cable
Start Time 0
4 : 3 0 A M
End Time 0 5 : 3 0 A M
Start Date 07 / 10/ 00 Mon
Tape Speed EP
CLEAR Cancel
MENU For next program
TIMER RECORDINGS
1 Make a New Program
2 Review/Cancel Programs
MENU Exit
PROGRAM1 (ONE TIME)
Channel 06 Cable
Start Time 0
4 : 3 0 A M
End Time 0 5 : 3 0 A M
Start Date 07 / 10/ 00 Mon
Tape Speed EP
CLEAR Cancel
MENU For next program